Europlex 3GS Guide de l'utilisateur télécharger pdf (Page 14)

NABLE

If attempts to Part, Half, Area or Full Set the system fail, the system buzzer briefly sounds and the display briefly shows:

This is normally due to a zone or door being open away from the exit route.

The 3GS system will display a FAILED TO SET message followed by suggestions as to what action to take in order to set

the system – for example, close all zones/doors.

Note The system will display which zones are open. In a multi-area system, the display does not indicate which

zones are open until you press CODE SHIFT SHIFT PART.

For example:

Action to take:

●

Go to the Area concerned and close the zone(s).

●

Return to the keypad and reselect the required ‘set/arm’ mode.

●

Leave via the exit route.

The system buzzer will stop when:

1. The Exit time expires or

2. When the ‘exit terminator’ button is pressed (if fitted).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 49 50

Pas de commentaire

Europlex 3GS Guide de l'utilisateur Page 14